
Boat and auto detailing supplies for Palm Beach and the Treasure Coasttwo stores, one number
Abrasives, compounds, polishes, coatings, cleaners, pads, tools and much more from the industry’s top brands, for boat owners, car owners and pro detailers from Boynton Beach to Fort Pierce. Walk into the store nearest your slip, or order online and we ship it.
Shop productsVisit the Riviera Beach storeTwo stores, 36 miles apart
Marine Detail Supply Palm Beach runs two walk-in stores on one website and one phone number. The Riviera Beach store at 51 E Blue Heron Blvd sits on the mainland side of the Blue Heron Bridge, a few minutes from Singer Island, Palm Beach Shores and the Lake Worth Inlet. The Stuart store at 733 NW Federal Hwy is on US-1 in Stuart, close to the St. Lucie River and the Indian River Lagoon. The two are about 36 miles apart, roughly 50 minutes by road without traffic.
Each town page on this site points you to one store: the closer one. Palm Beach County from Boynton Beach north to Tequesta goes to Riviera Beach. Martin County and the St. Lucie County towns go to Stuart. If you live in the middle, either works, so pick the store whose hours fit your day.
The water is the same story at both ends: salt, strong sun, humidity and a long season. That’s what we stock for, with Starke, Mirka, RUPES, FLEX, Lake Country, Koch Chemie, Malco, Collinite and Shurhold and more on the shelf. Rinse salt with a pH-neutral wash that won’t strip protection, cut oxidation out of chalky gelcoat, lock the finish in with a coating, and keep mildew out of cushions and canvas. Can’t get to a store? We offer free shipping on orders over $200 (UPS Ground) and a $7 flat rate on orders under $200. Orders placed before 2 p.m. ET, Monday through Friday, ship the same day.
Drive times to the nearest store
| Riviera Beach store | |
| Singer Island | about 1 mi · 3 min |
| North Palm Beach | about 3 mi · 8 min |
| West Palm Beach | about 5 mi · 13 min |
| Palm Beach | about 7 mi · 17 min |
| Palm Beach Gardens | about 8 mi · 18 min |
| Jupiter | about 12 mi · 21 min |
| Tequesta | about 13 mi · 25 min |
| Lake Worth Beach | about 16 mi · 24 min |
| Boynton Beach | about 22 mi · 31 min |
| Stuart store | |
| Jensen Beach | about 4 mi · 11 min |
| Palm City | about 5 mi · 11 min |
| Port St. Lucie | about 9 mi · 17 min |
| Port Salerno | about 10 mi · 23 min |
| Hobe Sound | about 13 mi · 23 min |
| Fort Pierce | about 17 mi · 32 min |
Approximate road distances and drive times without traffic, measured to each town’s center. I-95, US-1 and the bridges can add a lot at rush hour.
Riviera Beach
51 E Blue Heron Blvd
Riviera Beach, FL 33404
(561) 985-4801
| Monday – Friday | 8:00 a.m. – 5:00 p.m. |
| Saturday | Closed |
| Sunday | Closed |
Stuart
733 NW Federal Hwy
Stuart, FL 34994
(561) 985-4801
| Monday – Friday | 8:30 a.m. – 4:00 p.m. |
| Saturday | Closed |
| Sunday | Closed |
Palm Beach County towns
Each page covers the local water, public ramps and marinas nearby, the drive to Riviera Beach and the products that suit boats there.
51 E Blue Heron Blvd, near the Blue Heron Bridge, Singer Island and Palm Beach Shores.
See the page →Old Port Cove, the North Palm Beach marina and the Earman River off North Lake.
See the page →The Flagler Drive waterfront, Palm Harbor Marina and Rybovich on Lake Worth Lagoon.
See the page →The island side of the lagoon and the Town of Palm Beach Marina’s four docks.
See the page →Lake Worth Creek and the Intracoastal marinas on the PGA corridor.
See the page →The Jupiter Inlet, Lake Worth Creek and Burt Reynolds Park.
See the page →Jupiter Sound and the marinas on the north side of the inlet.
See the page →Bryant Park’s ramp on Lake Worth Lagoon, south of West Palm.
See the page →Boynton Harbor Marina, a half mile south of the Boynton Inlet.
See the page →Treasure Coast towns
Martin County and the St. Lucie towns, each pointed to the Stuart store on Federal Highway.
733 NW Federal Hwy, on US-1 in Stuart, for Martin and St. Lucie counties.
See the page →The Jensen Beach Causeway ramps on the Indian River Lagoon.
See the page →The St. Lucie River west of Stuart, up to the North Fork marinas.
See the page →Veterans Park at Rivergate and the North Fork of the St. Lucie.
See the page →Manatee Pocket, Sandsprit Park and the run to the St. Lucie Inlet.
See the page →Peck Lake, Hobe Sound and the Intracoastal south of the inlet.
See the page →The Fort Pierce City Marina and the Fort Pierce Inlet.
See the page →What salt, sun and humidity do to a South Florida boat
Six products that cover most of the year here: rinse the salt, cut the oxidation, finish the gelcoat, coat it, and keep mildew out of the soft goods.






Sand, cut, polish, protect
For wet-sanding and repair work, On the abrasives shelf: STARKE RAZOR mesh and FORGE sanding discs, STARKE MORPH discs and Quik Sand, Mirka Abranet ACE mesh discs and Abralon foam discs, and STARKE and Mirka interface pads.
Abrasives, compounds, polishes, coatings, cleaners, pads, tools and much more from the industry’s top brands: Starke, Mirka, RUPES, FLEX, Lake Country, Koch Chemie, Malco, Collinite and Shurhold.
A Palm Beach and Treasure Coast boating year
There’s no real off-season on this coast, just busier winters, hotter summers and storm season in between.
Winter and spring
- This is the busy stretch: snowbirds, boat shows and full marinas. Get compounding and coating done early, before the slip next to you starts asking who did your gelcoat.
- Correct first, protect second. A coating or sealant goes on best over a surface that’s already been cut and polished.
- Keep a waterless wash aboard for dock-side touch-ups between proper washes.
Summer and storm season
- Midday sun works on gelcoat, vinyl and canvas. Top up protection through the season instead of waiting for it to fail.
- Rinse salt the same day, before it dries into a film and spots the glass and stainless.
- Humidity is mildew’s best friend. Clean cushions and lockers, then treat them so it doesn’t come back.
Frequently asked questions
Which store should I use?
The closer one. Boynton Beach north through Tequesta is closest to Riviera Beach; Jensen Beach, Palm City, Port St. Lucie, Port Salerno, Hobe Sound and Fort Pierce are closest to Stuart. Both stores share the same phone number.
What are the store hours?
Riviera Beach: Monday–Friday 8:00 a.m.–5:00 p.m.; closed Saturday and Sunday. Stuart: Monday–Friday 8:30 a.m.–4:00 p.m.; closed Saturday and Sunday.
What’s the phone number?
(561) 985-4801 for both stores.
Do you ship?
Yes. We offer free shipping on orders over $200 (UPS Ground) and a $7 flat rate on orders under $200. Orders placed before 2 p.m. ET, Monday through Friday, ship the same day. Our shipping page says packages shipped within Florida usually arrive in about one business day by UPS Ground, except for the Panhandle.
Do you serve Delray Beach and Boca Raton?
Those areas are served by our sister store in Fort Lauderdale. You’re still welcome at either of our stores, and online orders ship anywhere we ship.
What brands do you carry?
Abrasives, compounds, polishes, coatings, cleaners, pads, tools and much more from the industry’s top brands: Starke, Mirka, RUPES, FLEX, Lake Country, Koch Chemie, Malco, Collinite and Shurhold. Browse the full lineup online, or call either store to check stock.
Start here
51 E Blue Heron Blvd, near the Blue Heron Bridge, Singer Island and Palm Beach Shores.
See the page →733 NW Federal Hwy, on US-1 in Stuart, for Martin and St. Lucie counties.
See the page →Addresses, hours, phone and directions for Riviera Beach and Stuart.
See the page →Two stores. One lineup.
Browse everything online, or call either store to check stock before you drive over.
Shop boat productsShop auto products

